History: How to install Openfire Meetings on ClearOS

Openfire is a real time collaboration (RTC) server supporting XMPP (Jabber) and WebRTC.

yum --enablerepo=clearos-contribs-testing install app-openfire

yum --enablerepo=clearos-contribs-testing upgrade openfire app-openfire

yum --enablerepo=clearos-contribs-testing install app-openfire

The skeleton app so far:

Assumptions

• This guide assumes your ClearOS server will be the main server for your domain. Thus, your website (powered by Tiki) will be on the same server. E-mails could also be handled (with Roundcube on ClearOS) but are also easily handled by your domain name provider.

Information

To Install Openfire 4.x on ClearOS 7.x within the WikiSuite environment follow the next steps.

1.- Install a fresh ClearOS Server, be sure to run the latest Software updates to the core system

2.- Make sure the clearos-epel repository is enabled

3- Include in the installation of:

a. The Web Server
b. and the Directory Server(Open LDAP)

Configure domain name

How to set domain name on ClearOS

Configure Firewall

The openfire app will take care of opening the following ports:

However, you will probably want to open more than thios. ClearOS's Firewall should configured to block all ports, and open the following:

Notes:

• Ports 7070 and 9090 are used for plain HTTP traffic. Each have a more secure HTTPS counterpart: 7443 and 9091 respectively. Consider disabling the HTTP ports, which could hurt interoperability and performance., but will increase security.
• An earlier draft of this page listed ports 5229 and 5349 (for Openfire). There is no known application for these ports. Where they included by mistake?

Configure OpenLDAP

1.-Initialize your OpenLDAP service through the Webconfig-Open LDAP Directory Server Module (https://yourserver.wikisuite.org:81/app/openldap_directory).

2.-On the Directory Server Settings page set the server mode and Base Domain (https://yourserver.wikisuite.org:81/app/openldap_directory/settings/edit)

3.-On the Directory Server Policies page set the Publish Policy and Accounts access according to your requirements (https://yourserver.wikisuite.org:81/app/openldap_directory/policies/edit)

4.-Don't forget to create one or two users as they will be use in the Openfire configuration phase. Use: (https://yourserver.wikisuite.org:81/app/users/add)

Install Openfire

1.-Login to your ClearOS via SSH using root

2.-Install the Openfire RPM

Type:

rpm -ivh http://www.igniterealtime.org/downloadServlet?filename=openfire/openfire-4.0.2-1.i386.rpm
yum install libvpx-devel

todo: replace above with wget following by rpm command

For Openfire to work on ClearOS 64-bit the 32-bit zlib library is required.
Source: https://community.igniterealtime.org/thread/43673

Type:

yum --enablerepo=clearos-centos install zlib.i686

And type "y" when requested.

3.- Start the Openfire service:

Type:

/etc/init.d/openfire start

And check the status

/etc/init.d/openfire status

Configure Openfire

Use a web browser to connect to the admin console. The default port for the web-based Initial setup admin console is 9090. Initial setup and administration can be done from a remote computer using LAN IP address instead or hostname if it is resolvable by the remote computer. i.e. (http://yourserver.wikisuite.org:9090). Source: http://www.igniterealtime.org/builds/openfire/docs/latest/documentation/install-guide.html

1.-The first screen will request you to choose your preferred language and press continue.

2.-For the second screen, Type your host domain and press continue. The Default Admin Console Port is 9090 and the Secure Admin Console Port is 9091.

3.-Select to use the "Embedded Database" and press continue.

4.-Choose "Directory Server (LDAP)" as the user and group system to use with the server and press continue.

5.-Configure the connection settings for your LDAP directory and press "Test Settings". (Connections settings such as password can be obtained from OpenLDAP Directory Setup (https://yourserver.wikisuite.org:81/app/openldap_directory)

• For Administrator DN in Openfire, use the Bind DN from ClearOS
• For Password, use the Bind Password from ClearOS

6.-Once the test has been successful press "Save and Continue"

7.-Configure how the server finds and loads users from your LDAP directory and press "Test Settings" Don't forget to check Store avatar in database if not provided by LDAP

8.-Once the test has been successful press "Save and Continue"

9.-Configure how the server finds and loads groups from your LDAP directory and press "Test Settings".

10.-Once the test has been successful press "Save and Continue"

11.-Choose one or more users from your LDAP directory to be administrators by entering their usernames. Press "Save and Continue"

12.- You Can test the user settings by clicking on the "Test" icon.

13.- Once the test has been successful press "Continue"

14.-Setup is complete! Click on "Login to Admin Console"

15.-Log in to the Admin Console.

16.- You should restart Openfire through your secure shell console.

Type:

service openfire restart

17.- Now you can login to your Admin Console through the Secure port at (https://yourserver.wikisuite.org:9091)

Install Openfire Meetings Plugin

1.- Login to your Openfire Admin Console with a administrator user.

2.- Click on the Plugins Tab to manage Plugins

3.- Click on the available plugins link and scroll down to find the Openfire Meetings plugin

4.- Click on then ¨+¨ to add the plugin to the Openfire server

5.- For security, Openfire Meetings Plugin creates an user focus. You need to create this user focus in ClearOS (https://yourserver.wikisuite.org:81/app/users). Then , go back in Openfire Meeting plugin tab, click on Setting in left menu and Security section for change the password for same that a ClearOS User's Focus.

Source: http://www.igniterealtime.org/projects/openfire/plugins/ofmeet/readme.html

Install Openfire Fastpath plugin

1.- Go to the Openfire plugins administration console (https://yourserver.wikisuite.org:9091/plugin-admin.jsp)

2.- Click on the "Available plugins" tab and look for the Fastpath plugin. Click on the "+" sign to install.

3.- Once the plugin has been successfully installed, you can proceed to configure in its own console.

4.- Refresh the Openfire console and the Fastpath tab should be available, click on it to configure Workgroups (https://yourserver.wikisuite.org:9091/plugins/fastpath/workgroup-summary.jsp)

Notes:

• You can find a Quick start guide here:https://community.igniterealtime.org/docs/DOC-1513

• Here is a live example: http://avan.tech/Fastpath and some notes from Guus (keep or delete what you think)

• The snippet is provided on the Openfire Admin Console (Fastpath -> Workgroup Manager -> Workgroup Settings -> Text)

• jivelive.jsp is available on http://evoludata.com:9090/webchat/jivelive.jsp - perhaps you'll need to edit the snippet above, if you're redirecting access to that resource through a reversed proxy.

• There's a simple landing page here: http://evoludata.com:9090/webchat/

Configure Tiki, ConverseJS and OpenFire

To get a transparent authentication between ConverseJS and Openfire, we need
to configure Tiki and install the TikiToken plugin in OpenFire.

1 - Download the latest tikitoken.jar at https://github.com/fabiomontefuscolo/openfire-tikitoken/releases The Tiki Token plugin is now shipping as an optional plugin in Openfire 4.1.5 Just activate as you would for any Openfire plugin.

2 - Upload tikitoken.jar on OpenFire plugins page, at http://yourserver.wikisuite.org:9090/plugin-admin.jsp

3 - Go to server properties page at http://yourserver.wikisuite.org:9090/server-properties.jsp
and setup a new property with name org.tiki.tikitoken.baseUrl and property
value will be your tiki base url, let's suppose http://tiki.wikisuite.org.

4 - Configure Tiki to talk to OpenFire. Go to community page on admin panels,
(http://tiki.wikisuite.org/tiki-admin.php?page=community), select the XMPP tab,
and:

• Check the XMPP client (ConverseJS)
• On XMPP server host field, type yourserver.wikisuite.org
• On XMPP http-bind url field, type http://yourserver.wikisuite.org:7070/http-bind/
• Check XMPP Openfire Token
• Click on Apply

5 - Still on Tiki, go to "Modules" panel (http://tiki.wikisuite.org/tiki-admin_modules.php);

6 - Click on "All modules" tab;

7 - On field Filter type xmpp;

8 - Drag the result to bottom of page, in the closest gray bordered box;

9 - Just save the popup will appear;

10 - Refresh the page to see the box at the bottom of the page;

Configure email

Going to https://yourserver.demo.wikisuite.org/webmail to access to Roundcube, then login with your username and password.

In ClearOS

You can to set the options about to sending the emails

https://example.org:81/app/smtp

You can to set the options about to getting the emails

https://example.org:81/app/imap

In Openfire

Edit the email setting in a server manager tab like on an image:
https://example.org:9091/system-email.jsp

Edit the email listener in a Meeting tab like on an image:
https://example.org:9091/plugins/ofmeet/ofmeet-email-listener.jsp

Adding admins

1.-There is no ClearOS group for the Openfire admins. Instead: Server -> Server Manager -> System Properties -> admin.authorizedJIDs

Edit server properties (https://yourserver.wikisuite.org:9091/server-properties.jsp)

2.- Find the admin.authorizedJIDs property, edit it and add comma separated full JIDs. In our specific case user at example.org. "Click on Save Property"

3.- Openfire needs a restart, Login to your ClearOS via SSH using root and type:

service openfire restart

Configure SSL

As of Openfire 3.2 certificate management can be performed from the Admin Console. (And in 4.0, code has been revamped)

Once the setup process is completed Openfire will create self-signed certificates for the assigned Openfire's domain. Most users should either get the created certificates signed by a Certificate Authority or replace the created certificates with your own certificates. Source: http://www.igniterealtime.org/builds/openfire/docs/latest/documentation/ssl-guide.html

• You can access the certificate store at: https://yourserver.wikisuite.org:9091/security-certificate-store-management.jsp

• Manage the existing certificates in the Openfire Identity Certificate Store

• Import Private Key and Certificate

As ClearOS also manages SSL certificates, they can co-exist independently as their storage files are different and independent. i.e. Openfire generated certificates will only be used within Openfire applications.

Avoiding non-standard ports

In some contexts, (corporate environments, captive portals in Internet cafes, etc.), some ports can be blocked. Thus, if you want to get rid of port number, you can put the following apache configuration (Apache 2.4+ so you need ClearOS 7.x):

ProxyPass /ofmeet/ http://localhost:7070/ofmeet/
ProxyPassReverse /ofmeet/ http://localhost:7070/ofmeet/
ProxyPass /ofmeetws/ wss://localhost:7070/ofmeetws/
ProxyPassReverse /ofmeetws/ wss://localhost:7070/ofmeetws/

Team room

To create a private room

Go on "Group Chat" tab.

Then going to "create new room" on left menu.

Then fill out the appropriate fields (Minimum Room ID, Room Name and Description). Finish with click on save changes button.

For use the private room

• Web access with CandyChat

Go on https://example.org:7443/ofmeet/candy.html
then login with your account access.

• WebRTC access

With https://example.org:7443/ofmeet/ (from which you can pick a room)

• XMPP client access

with Spark in a login session, click on "Action" tab then a "joint a chatroom" option. In a new pop up, double-click in a list on a right chatroom.
with Jitsi in a login session, click on "File" tab then a "joint a chatroom" option. In a new pop up, select a right account and write a chatroom name.

Remote Control of Keyboard and Mouse

This requires users install an app on their desktop (Windows / GNU/Linux / MacOSX) and to have the Openfire plugin for Chrome plugin.

How to use

• You as the person who is actively sharing a screen can select the panel of a participant on the film strip. If video is NOT working, you will not get any video panels. If you do, then you can select any and then click on remote control icon. The person on the other end will be notified that they have control of your desktop
• You as a participant can request for remote control of an active screenshare from the desktop owner by clicking on the remote control icon. The owner will receive a popup windows requesting an accept or decline. If request is accepted, then remote control will be given

STUN / TURN server

• Todo later Marc: discuss with Dele (What / How to install and what ports to open)

Advanced configuration

• If your XMPP server is not on the same server as your website, and you want to support (typically older) XMPP clients which don't support SRV records, you will need something like http://sourceforge.net/p/penloadbalancer/wiki/penctl.1/

Linking workaround

Specially when using any RedHat 7 based distribution, Java shiped in RPM has not all the required symbols. You must do this workaround.

yum install java-1.7.0-openjdk java-1.7.0-openjdk-devel
cd /opt/openfire
mv jre jre.1
ln -s /usr/lib/jvm/java/jre/ jre

Todo

• update to use Java 8 done
• Document how to use with https://github.com/igniterealtime/Pade

Make sure these installation instructions provide great security

• Secure by default. Remove all http and force https
• Ref: http://wiki.xmpp.org/web/Securing_XMPP#Openfire
• Not like this:
• Verify that documenting leads to respecting Public Statement Regarding Ubiquitous Encryption on the XMPP Network

Related links

• http://igniterealtime.org/projects/openfire/documentation.jsp
• https://www.clearos.com/clearfoundation/social/community/how-to-install-openfire-3-7-1-on-cos-6-3-64bit-manual-install
• http://rtcquickstart.org/guide/RTCQuickStartGuide.pdf
• How to install Spark

Souce code

Troubleshooting

• How to install and Configure Openfire Meetings on ClearOS